February 3

Spider 3D printed Guitars

Spider-3D-Printed-Guitar

Spider 3D printed Guitar

The Spider 3D printed guitar was designed specifically for laser sintering, one of the common 3D printing technologies that allows for the manufacture of full strength, extremely complex parts. The entire body, including all the little spiders inside the body, was printed as a single component, which could not be manufactured any other way.

The Spider can be fitted with your choice of neck and hardware. One of the beauties of 3D printing is that it allows us to relatively easily customise the guitar to suit your needs. In the case of the Spider, we can add anything you want onto the space on the back of the guitar, or modify almost anything else you want. And, of course, it’s just as easy to make the guitar left-handed as right-handed.

Spider 3D printed Guitar

Spider 3D printed Guitar

Neck : Warmoth Pro Angled maple neck with rosewood fret board, 22 frets, 25 1/2″ scale, 42.86mm (1 11/16″) width Corian nut, 6150 sized jumbo frets, 10-16″ compound radius fret board, mother of pearl inlay dots

Body : 3D printed Nylon outer body, with mahogany inner core, Your choice of colour and sprayed with clear satin polyurethane

Bridge : Schaller 475, 6 String Flat Mount Bridge

Pickups : Seymour Duncan 59 Model Pickups

Tuning Heads : Schaller Mini Locking Tuners

Controls : Pickup select switch, Concentric Volume and Tone knob

Other : Schaller Strap Locks, D’Addario strings,

Weight : 2.2Kg


Copyright 2021. All rights reserved.

Posted February 3, 2021 by admin in category "3d-printed-guitar

2 COMMENTS :

  1. By Steve on

    Thanks for the info about 3d printed guitar, very helpful and now cant wait to get one. Thanks

    Reply

Leave a Reply to Steve Cancel reply

Your email address will not be published. Required fields are marked *